FAQ --- Lost steps or staggered floor
2019-11-06

Lost steps or staggered floor when printing

A. Check whether the pulley is not fixed.

B. Check whether the X axis mechanism and Y axis mechanism can move smoothly. Add some oil on the bearing if necessary.

C. Properly adjust the belt tension, too tighter will lead to big movement resistance and too looser lead to slip.

D. Check whether the filament roll can rotate and filament can be fed into the extruder smoothly.

E. Reduce print speed and test again.

F. Belt looseness leads to belt slip. Adjust the tightness of belt properly.

FAQ --- Lost steps or staggered floor2019-11-06